1. Prepare the PC with the installation files you need to run the Zebra printer. Go to this link:
https://www.zebra.com/us/en/support-downloads/printers/desktop/zp450.html
2. Click on the download next to Windows 10 driver.
3. Accept and download
4. Locate the file in the download folder and extract the zip file
5. Navigate to the folder where you extracted the files and click on the setup.exe file
6. Click on "Install Zebra Printer". Click YES to allow Zebra to make changes to your computer. You drivers should be ready for the printer.
7. Click on the option below. Click Next
8. Leave default and click Next.
9. Install the Zebra Font Downloader and click Next
10. Click Next
11. Click Next
12. Click Next.
13. I would uncheck this boxand click next.
14. Click Install
15. Click Finish
16. Before you plug the AC outlet to the Zebra printer, make sure the jumper plug is connected to the printer.
8. Insert the label stock into the printer. Leave a little of the label (about 1") sticking out.
9. Connect the power cord and USB cord to the computer. Then turn on the printer. If you get a red light on the printer, hold the button until the light turns green.
10. If you go to settings (Printers & scanners), you should see the printer appear. Click on the printer and click Manage
11. Click on "Print a test page"
12. If the following appears, then you are all set.
